GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-OV8
1746-OV8
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-OV8 1746-OV8//A
Common misspellings:
- l746-OV8
- 17A6-OV8
- 1746-0V8
- 1746-OVb
- 1746OV8
The Allen-Bradley 1746-OV8 is DC output module which is part of the SLC 500 output module series. Its backplane current is 135mA at 5V and it is 0A at 24V. When supplied with an external power supply, the 1746-OV8 draws a current of 0.8A at 24V and of 0A at 5V. It is a current sinking module with 8 I/O points and 8 points per common. The 1746-OV8 operates in a voltage category of 24V DC within a 10-50V DC voltage range. At 1A, the 1746-OV8’s maximum on-state voltage drop is 1.2V. In addition, it has an off-state leakage current (output) of 1mA. Its on-signal delay is 0.1ms maximum
The 1746-OV8 output module’s continuous current is 1A per point at a temperature of 30 degrees Celsius and the current is 0.5A at 60 degrees Celsius. Note that a resistor can be mounted in parallel to the load to scale down the effects of a leakage current. The 1746-OV8’s heat dissipation rating is 0.775W per point, with a minimum of 0.675W and a maximum of 6.9W. A Hand-Held terminal or must be used when reconfiguring the module. The 1746-OV8 has an operating temperature of between 0 and 60 degrees Celsius.
To monitor its functioning and to ensure faults are detected early, the 1746-OV8 has LED indicators on its front panel. It accommodates cables up to #14 AWG. The 1746-OV8 is ideal for use with high-density low current DC outputs in dry and clean industrial environments. The 1492 interface module and pre-wired cables are suitable options when wiring the 1746-OV8.
