GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-OV32
1746-OV32
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-OV32 1746-OV32//A1746-OV32//B1746-OV32//C1746-OV32//D
Common misspellings:
- l746-OV32
- 17A6-OV32
- 1746-0V32
- 1746OV32
The Allen-Bradley 1746-OV32 digital output module is part of the SLC 500 output module series. This module has a current rating of 0.19A at 5V and 0A at 24 voltages. It has a thermal dissipation of 0.078W per point, a minimum dissipation of 2.26W and a total dissipation of 4.8W. The 1746-OV32 is a current sinking DC transistor output module. Its operating voltage category is 24V DC and it has 32 input/output points. The 1746-OV32 has an operating voltage range of 5-50V DC. The surge current is 1A at 30 and 60 degrees Celsius per point for a period of 10 seconds.
The 1746-OV32 has a continuous current per point of 0.5A and 0.25A at 30 and 60 degrees Celsius, respectively. It doesn’t have a continuous current per module. On a maximum resistive load, the 1746-OV32 has a signal off-delay of 1ms and 0.1ms on-delay. The 1746-OV32 has 16 points per common and a 1mA minimum load current. The module is most suited to be used in high-density low current DC outputs. It has a step response of 2.5ms in and 60ms out.
The 1746-OV32 weighs 0.59 kg. The outputs of the 1746-OV32 have a transient pulse which occurs due an external DC power supply being fed to the output terminal (common). These transient pulses are bound to occur whether the processor is powered or not. To prevent the harmful effects that this transient pulse can cause, increase the on-state load current by connecting an exterior resistor to the load in parallel with it.
