GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-IN16
1746-IN16
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-IN16 1746-IN16//A1746-IN16//B1746-IN16//C
Common misspellings:
- l746-IN16
- 17A6-IN16
- 1746-1N16
- 1746-lN16
- 1746-INl6
- 1746IN16
The Allen Bradley 1746-IN16 is an SLC 500 24 Volt AC/DC sinking Input Module. It dissipates heat at 0.35 Watts per point and has 0.425 Watts at minimum and 6 at maximum. It has 16 inputs translating to 16 points per common and operates at a voltage between 10 and 30 Volts DC (sinking) and 10 to 30 Volts AC.
The 1746-IN16, with a backplane current consumption standing at 0.085 A at 5 Volts DC has a maximum signal delay in both its on and off states of 15 milliseconds for a DC current, and 25 milliseconds for an AC current. It has an 8-milliamp nominal input current at 24 Volts AC/DC, dropping a maximum of 3 Volts of AC voltage when in the AC off state and 3 Volts of DC voltage when in the DC off state. It also leaks 1mA of current in the off state for both AC and DC.
The 1746-IN16 gives electro-optical isolation tested at 1500 Volts between input terminals. It comes equipped with removable terminal blocks and can be used with a 20 conductor 1492-CABLE RTBB, which can be ordered in the standard lengths of 0.5, 1.0, 2.5 and 5 meters. The 1746-IN16 is used as a general purpose 16 channel input module and can thus be used with the 1746-SIM Input Simulator.
The 1746-IN16 is a powerful input module. It meets the standards for use in industrial environments, which includes being able to withstand temperatures of 0 to 60 degrees Celsius while operating and -40 to 85 degrees Celsius while in storage. This module is available in series A through to D.
