GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-IA8I
1746-IA8I
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-IA8I 1746-IA8I//A
Common misspellings:
- l746-IA8I
- 17A6-IA8I
- 1746-1A8I
- 1746-lA8I
- 1746-IAbI
- 1746-IA81
- 1746-IA8l
- 1746IA8I
The Allen Bradley 1746-IA8I is an input module with 8 isolated circuit inputs. The 1746-IA8I fits only into Allen-Bradley 1746 I/O racks for the SLC-500 modular and fixed systems. The 1746-IA8I has broad operating ranges, increasing its diversity of uses. It can be used with limit switches, selector switches, float switches, push-buttons and photo sensors. Additionally, the 1746-IA8I can monitor starter outputs or relay directly.
The 1746-IA8I has 1, personally isolated, point per common. Its operating voltage category is 100-120V AC at 50-60Hz and the source/sink voltage category is 100-120V DC. Its operating voltage is 80-150V AC at 47-63Hz. The 1746-IA8I has a nominal input current of 16mA at 120V AC and at 60Hz and that current is 2.5mA at 120V DC. The 1746-IA8I has a maximum input inrush current of 0.7A at 120V AC. It also has a maximum input signal delay of 17ms at 120V AC or 7ms at 120V DC during an OFF-to-ON operation, and the delay is 45ms at 120V AC or 40ms at 120V DC during an ON-to-OFF operation.
The 1746-IA8I input module has a maximum Off-state current of 4mA at 20V AC and 0.5mA at 20V DC. The 1746-IA8I’s maximum thermal dissipation is 0.5W at 120V AC/DC or 0.75W at 150V AC/DC per point and maximum total wattage of 4W at 120V AC/DC or 6W at 150V AC/DC.
The 1746-IA8I draws a 0.11A maximum backplane current at 5V and a 0A backplane current at 24V. The 1746-IA8I module has a 1500V point-point isolation. These means overloads, shorts, and other interferences in 1 circuit won’t affect devices on other circuits and different power sources can be connected to the same module without damaging components.
The 1746-IA8I’s operating temperature is 0-60° C and it has a storage temperature rating of -40-85° C at a relative humidity level of 5-95% in a noncondensing environment. The 1746-IA8I is UL/C-UL (class I, div 2, groups ABCD) for EMC and 73/23/EEC for low voltage-certified.
