GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-IA4
1746-IA4
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-IA4 1746-IA4//A
Common misspellings:
- l746-IA4
- 17A6-IA4
- 1746-1A4
- 1746-lA4
- 1746-IAA
- 1746IA4
The Allen-Bradley 1746-IA4 digital input module is part of the SLC-500 series of processors. It has 4 input points with 4 points per common. The 1746-IA4 operates at a voltage category of 100-120V AC signal input. Its operating voltage is 85-132V AC at 47-63 Hz. The 1746-IA4’s backplane current consumption is 0.035A at 5V DC and 0A at 24V DC and it has a maximum signal delay of 35ms when powered On and 45ms when powered Off.
In addition, the 1746-IA4 input module has an Off-state maximum voltage of 30V AC and a maximum Off-state current of 2mA. The 1746-IA4’s input current rating is 12mA at 120V AC nominal, its maximum inrush current is 0.8A, and its maximum inrush current time duration is 0.5ms. The inrush current can be limited using a current limiting resistor. Note that the use of a current limiting resistor will affect the operation of the 1746-IA4 input module.
The Allen Bradley 1746-IA4 has a thermal dissipation rating of 0.27W per point, a minimum dissipation of 0.175W, and a maximum dissipation of 1.30W. The 1746-IA4 measures 5 inches x 2 inches x 6 inches and it weighs 0.17 kgs. It operates at a temperature range of 0-60 degrees Celsius. The 1746-IA4 digital AC input module has a status display panel on its front side to help in diagnosing faults when they occur.
The 1746-IA4 is meant for mounting on a chassis with an open enclosure. It also has an operating shock rating of 30G and one of 50G when not in operation.
