GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-BTM
1746-BTM
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-BTM 1746-BTM//A1746-BTM//B
Common misspellings:
- l746-BTM
- 17A6-BTM
- 1746-8TM
- 1746BTM
The Allen-Bradley 1746-BTM is a Barrel Temperature Control Module (BTM) in the SLC 500 series. The 1746-BTM is compatible only with SLC 502, SLC 503, SLC 504 and SLC 505 processors in a local I/O chassis. It has 4 temperature inputs at 16-bit or 15-bits resolution. The 1746-BTM has 50mV or 100mV analog inputs and has no analog outputs. The 1746-BTM uses the 16-bit signed integer for its data format. The module has a backplane current of 110mA at 5V DC and 85mA at 24N DC. The 1746-BTM uses the 1746-RT32 for connecting hardware. The Barrel Temperature Control Module intelligently controls four heat/cool PID loops for barrel temperature control applications.
The 1746-BTM accommodates thermal couple inputs B, C, D, E, J, K, N, R, S or T, a sigma-delta modulation as the conversion method. It has a low-pass digital filter on analog input. The 1746-BTM has a common mode rejection >120dB at 50/50 HZ with 1KΩ imbalance and a thermal mode rejection >50dB at 50Hz and >60dB at 60Hz. Additionally, the 1746-BTM has a channel bandwidth of 8Hz and an isolation voltage capped at 1000V AC for 60sec.
The 1746-BTM can be used with injection moulding and extrusion temperature control applications. The 1746-BTM does not support any other type of application. For programming, the 1746-BTM has an Auto Tune feature. This makes it possible to identify and incorporate all the characteristics of the controlled system into the control scheme all in a one-time event. Bits 10-8 to 100 can be configured to report error codes in word 192 of the output image buffer table.
