GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » SLC-500 » You are here: 1746-A4
1746-A4
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1746-A4 1746-A4//A1746-A4//B
Common misspellings:
- l746-A4
- 17A6-A4
- 1746-AA
- 1746A4
The Allen Bradley 1746-A4 is a four-slot chassis that is made to house processors from the SLC 500 family of programmable controllers. The 1746-A4 must have its own power supply, which can be mounted on the left side of the chassis. The 1746-A4 modular chassis holds the processor or I/O adapter module and the I/O modules. The modular chassis offers advanced flexibility during system configuration. For extension, three I/O chassis can be interconnected using chassis interconnect cables. The 1746-C7, 1746-C9, and 1746-C16 cables can be used for interconnecting.
The modules inside the 1746-A4 can be arranged in any order and in any side of the chassis. The required spacing for the modules inside the 1746-A4 is a minimum of 6.0 inches between the modules and the upper part of the chassis, a minimum of 4.0 inches between the modules and the right/left sides of the chassis, and 6.0-8.0 inches between chassis when more than one chassis is used.
When installing the 1746-A4 chassis, make holes in the enclosure’s back panel to introduce chassis mounting. Install the hardware for the top mounting tabs. Slide the chassis over the installed hardware and tighten the screws. Install the remaining hardware tab leaving the far right and left tabs open to cater for grounding. The 1746-A4 has a maximum backplane current of 10A. The chassis weighs 0.75kg when not loaded. Dimensions for the 1746-A4 are 177mm x 68mm x 145mm. The 1746-A4 has 0° C minimum operating temperature and 60° C maximum operating temperature.
