GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

Mon-Fri 8AM-5PM EST

S811V10N3S

Rated 0/5 Based on 0 ratings.

Rate your purchase of the S811V10N3S

S811 Soft Starters Series Image

S811 Soft Starters Series Image

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Eaton Cutler-Hammer's S811V10N3S soft starter is an open non-combination soft starter; it is a scalable 3-phase motor acceleration solution with enhanced diagnostics, maximum motor uptime, and consistent performance. It includes a digital interface module that allows users to change control parameters, activate or deactivate protections, set communication variables, monitor system parameters, and access the fault queue. It comes with power ratings of 315 kilowatts at 230 volts AC (50 hertz) and 400 horsepower at 230 volts (60 hertz) and runs at 200 to 600 volts AC power. This is the most powerful solid-state soft starter with smart technology in the Eaton S811+ series. It is capable of delivering 1000 amps to the motor linked to its output. It is highly suggested any qualified experts should install and service this equipment. The S811V10N3S soft starter's quick-connect connectors enable integration into industrial automation networks. It is compatible with the Ethernet and DeviceNet protocols. The normal soft-start modes on this motor starter are the voltage ramp, current limit, and selectable kick-start. The LCD on the S811V10N3S soft starter displays status information as well as control parameters to users. Users can configure all of the system's protection mechanisms using the programming buttons. The users can change the current trip value or the high voltage detection limit. The device is an AC-rated motor speed controller that is certified by UL, CSA, CE, and IEC. The shock resistance of the S811V10N3S soft starter is 15 G. It measures 281 millimeters by 421 millimeters by 187 millimeters and weighs 91 kilograms without the lugs (the lugs weigh about 12 kilos).

Technical Specifications for S811V10N3S

ManufacturerEaton Cutler-Hammer
SeriesS811+ soft starter
Product TypeOpen Soft Starter
Frame SizeV sized (290 mm)
Nominal Load Voltage208 V, 240 V, 380 V, 480 V, 575 V
Overload Capacity450% for 30 Seconds
Control Voltage24 VDC
Operating Voltage200-600V AC at 47-63 hertz
Max. Current Capacity1000 amps
Insulating Voltage660 VAC
Power Rating (Horsepower)200 to 900 HP (based on voltage)
ProtectionOverload Protection
EnclosureNo
ApprovalsEN, UL, CE, CSA, CCC, and IEC

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.