GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: PLC-5-60
PLC-5-60
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the PLC-5-60 PLC-5-60//A
Common misspellings:
- P1C-5-60
- PLC-5-6o
- PLC560
The PLC-5-60 is a standard enhanced PLC-5 programmable controller from Allen-Bradley/Rockwell Automation. The controller is supplied as a controller bearing the 1785-L60B catalog number. The PLC-5-60 has a user memory capacity of 64K words. The maximum total number of I/O for the PLC-5-60 stands at 3072 I/O. Communication to and from the module is done through 4 Data Highway plus (DH+) ports found on the module and a universal remote I/O. When a universal remote I/O link is used, the PLC-5-60 supports a maximum of 32 I/O chassis per each I/O link.
The current rating for the PLC-5-60 is 3.3 Amps which is drawn from the backplane at 5 Volts. As with other PLC-5 controllers, the PLC-5-60 conforms to the EN-50081-2 and EN-50082-2 electromagnetic compatibilities in industrial environments that have a generic emission standard, part two. When installing the PLC-5-60, the power supply should be turned on to prevent the occurrence of a processor fault or the memory from losing its contents. To prevent accidental writing from being performed on the PLC-5-60, the controller is supplied with a write protection jumper which is removable once the programing is done. Once removed, the PLC-5-60 cannot recognize any programming attempts unless the jumper is fitted back in the PLC-5-60 processor. The controller occupies a single leftmost slot in the I/O chassis. Additionally, the PLC-5-60 uses a 1770-XYC battery which performs at its best within a temperature of 60 degrees Celsius. When the low-battery LED indicator lights up, the battery can power the PLC-5-60 for an additional 5 days.
