GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1785-ME64
1785-ME64
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1785-ME64 1785-ME64//A
Common misspellings:
- l785-ME64
- 17b5-ME64
- 1785-ME6A
- 1785ME64
The 1785-ME64 is a memory device module used in PLC-5 enhanced program controllers. This EEPROM module is a product from Allen-Bradley/Rockwell Automation. Other versions of the 1785-M series include the 1785-ME16, -ME32, and –M100 series, and they’re classified in terms of their storage capacities. The “ME64” indicates that it is an EEPROM module with the storage size of 64K words. The 1785-ME64 is a compatible program controllers, such as the 1785-L80B, -L60B, -L60L, -L40B, and the -L40L. Since it is an EEPROM used as a program backup, the 1785-ME64 has a reprogrammable ROM that can be modified, erased, and rewritten repeatedly when it is connected to an application with a voltage supply that is higher than normal. The memory module features a write-protection jumper and an expansion port for the control coprocessor. The write-protection jumper is attached to the 1785-ME64 to write a program to the memory module. The Allen-Bradley 1785-ME64 EEPROM memory module can be used at high altitudes of up to 2000 meters. Its light weight of 70.875 grams (2.5 ounce), its operating temperature range of the of 0 to 60 degree Celsius, and its storage temperature range of -40 to 85 degree Celsius make the Allen-Bradley 1785-ME64 memory module suitable for different types of conditions. However, make sure that there is enough space around the terminal inside the enclosure and sufficient air ventilation, because the 1785-ME64 emits excessive heat and has 95% relative humidity without condensation.
The memory module has passed vibration tests and shock tests, and has been certified by the Canadian Standards Association, European Union EMC Directive, and Underwriter Laboratories. The 1785-ME64 has a vibration of 2 grams at 10 to 500 Hertz, while its operating and non-operating shock of 30 grams at 11 milliseconds duration and 50 grams at 11 milliseconds duration, respectively. To install the Allen-Bradley 1785-ME64 EEPROM module, switch of the power to the input/output chassis and remove the processor. Also, make sure that backplane switches 6 and 7 should be set according to the product manual, to avoid any data loss or errors. Keeping the keying pins downward, insert the 1785-ME64 memory module into the processor. Push the memory module firmly enough to hear the snapping sound confirming that the connector pins are snapped into the processor’s connector. Safely, insert the processor into the input/output chassis. After transferring and executing the program, switch of the power and repeat the removal process of the processor. Pry out the 1785-ME64 memory module from the processor and remove its write-protection jumper using needle-nose pliers. Repeat the above mentioned process to reinstall the memory module and the processor.
