GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1785-L80B
1785-L80B
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1785-L80B 1785-L80B//A1785-L80B//B1785-L80B//C1785-L80B//D1785-L80B//E
Common misspellings:
- l785-L80B
- 17b5-L80B
- 1785-180B
- 1785-Lb0B
- 1785-L8oB
- 1785-L808
- 1785L80B
The Allen-Bradley 1785-L80B is a CPU module for PLC-5 programmable controllers. It is a modular component of a 1771 I/O system comprising an I/O chassis, a power supply, the CPU module, and various I/O modules. The 1785-L80B occupies one slot in the 1771 I/O chassis. The maximum user memory provided on the 1785-L80B is 100 K words. A slot for additional memory modules is provided on the 1785-L80B. The 1785-L80B supports a maximum of 3072 I/O (any mix) or 3072 outputs or 3072 inputs (complementary). The 1785-L80B supports a maximum of 24 I/O racks (with an address range of 0 to 27). The maximum number of I/O chassis supported are 93 (1 local plus 92 remote chassis).
Four DH+/Remote I/O (configurable for the adapter and scanner modes) are provided on the 1785-L80B. Four 3-pin ports (Channels 1A, 1B, 2A, 2B) can be configured for remote I/O scanners, remote I/O adapters, DH+, or unused. The default configuration for Channels 2A and 2B is “unused.” The default configuration of Channel 1A is for the DH+ network at 57.6 kbps whereas the default configuration of Channel 1B is for the remote I/O scanner. One serial port that is configurable for the EIA RS-232 / RS-423 systems and it is compatible with the RS-422A system is also provided. The physical interface of the serial port is a D-shell with 25 pins. The default port configuration is set to 2400 bps, DF1 point-to-point, no parity, one stop-bit, and BCC error check. The default configuration enables processor programming. The 1785-L80B dissipates 17.3 Watts power as heat and it draws 3.3 Amps (at 5 Volts DC) from the backplane.
