GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1785-L26B
1785-L26B
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1785-L26B 1785-L26B//A1785-L26B//B1785-L26B//C
Common misspellings:
- l785-L26B
- 17b5-L26B
- 1785-126B
- 1785-L268
- 1785L26B
The 1785-L26B is an enhanced PLC-5 programmable controller from the PLC-5-26B series. It is manufactured by Allen-Bradley. The 1785-L26B has a 25-pin D connector which is used for communication using the RS-232 and RS-423 protocols. The 1785-L26B is made to be operated at an ambient temperature range of 0 to 60 degrees Celsius and the humidity of the environment must be non-condensing and between 5 and 95%. The weight of the 1785-L26B is 1.42 Kg and it is available in an open-style enclosure. The 1785-L26B can withstand an operating shock of 30G and a vibration of 1G at 10 to 500 Hertz. The controller has a I/O scan time of 10 milliseconds at 57.6 kbits/s, 7 milliseconds at 1115.2 kbits/s, and 3 milliseconds at 230.4 mbits/s.
The maximum I/O chassis supported by the controller is 13. The 1785-L26B has a battery-backed RAM to prevent the loss of data if there is any power failure. There is a backup option of EEPROM to store the programs by using the compatible backup modules. The controller has a protected memory and a 16KB word processor. The controller supports a maximum of 512 analog I/O ports. The controller must be installed or replaced by a person familiar with the system to avoid any damage to the equipment. Follow the instructions provided by the manufacturer for the proper installation procedures. The maximum backplane current for the module is 2.6 Amps at 5 Volts DC. The 1785-L26B weighs approximately 1.42 Kg and the module is UL listed, CE certified, and CSA and C-tick certified.
