GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-WI
1771-WI
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-WI 1771-WI//A
Common misspellings:
- l771-WI
- 177l-WI
- 1771-W1
- 1771-Wl
- 1771WI
The 1771-WI is a PLC-5 Thermocouple wiring arm manufactured by Allen-Bradley. This is a hardware component, which has eighteen terminals, is shipped with the high-resolution thermocouple I/O modules/millivolt, and it is located on the bottom of the 1771 I/O chassis. These terminals offer connection points for the inputs and outputs of the modules that are connected to it. This module features a maximum I/O connection capacity of 8 modules. The 1771-WI gives easy and convenient linkage between chassis wiring and the high-resolution thermocouple I/O modules. It uses a 14-gauge stranded wire size with 3/64 inches thick insulation. These act as base conductors and it features a gold conformal coating.
The 1771-WI is used in high-resolution thermocouple applications and it is not fused. Its optimum field-arm screw torque is 7 by 9 pounds on an inch and its weight is approximately 0.3 pounds or 0.1 kilograms. Wiring arms usually provide an easy and flexible interconnection between plant wiring and 1771 I/O modules. The integral I/O chassis clamp offers a swing-away operation that facilitates easy module access. An integral module-locking tab aids in ensuring connection integrity. Constructed of an industrial-grade thermoplastic, each wiring arm consists of one connection point for each required input or output to the module and any needed ancillary connection points for line or signal input. Incoming wires may be clamped directly or spade-lugged to the arm. The 1771-WI provides fuse protection for each output of a module and this eases fuse replacement without a module removal from the chassis. During installation, users can replace fuses by removing individual fuse holders without the removal of the output module.
