GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-VHSC
1771-VHSC
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-VHSC 1771-VHSC//A1771-VHSC//B
Common misspellings:
- l771-VHSC
- 177l-VHSC
- 1771VHSC
The Allen-Bradley 1771-VHSC is a very high speed counter module for industrial applications. The module can be used with programmable controllers from Allen-Bradley that support block transfer and the 1771 I/O architecture. The 1771-VHSC can be installed in any slot in any 1771 I/O chassis. It counts pulses from pulse generators, proximity switches, encoders, and mechanical limit switches. The module provides 4 counters, 4 inputs, and 8 outputs. Each counter supports three inputs: A, B, and gate/reset. The input voltage is user selectable and can be either 5 Volts DC or 12 to 24 Volts DC. The input current is minimum 4 milliamps, typically 7 milliamps at 5 Volts DC, and 7 to 15 milliamps at 12 to 24 Volts DC. The output voltage is 5 to 24 Volts DC (supplied by customer) and the output current is 2 Amps per channel.
The 1771-VHSC draws 650 milliamps from the chassis backplane. The maximum power dissipated by the module is 13 Watts and the minimum power dissipation is 2 Watts. The maximum thermal dissipation is 54.2 BTU/hour and the minimum dissipation is 6.8 BTU/hour. To prevent damage to the module, the following precautions should be followed when handling or installing the module: the connector pins, backplane connector, and circuit components should not be touched. The personnel handling the module should ground themselves and wear a ESD wrist-strap device, and the module should be kept in a static shield bag when not in use. The working temperature range for the 1771-VHSC is 32 to 140 degrees Fahrenheit whereas the storage temperature range is -40 to 185 degrees Fahrenheit. The module performs optimally in environments with 5 to 95% relative humidity.
