GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-SN
1771-SN
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-SN 1771-SN//A1771-SN//B
Common misspellings:
- l771-SN
- 177l-SN
- 1771SN
The Allen-Bradley 1771-SN is the sub I/O scanner module for PLC systems. It is compatible with processors that support block-transfer including the PLC-2, PLC-3, PLC-5, and PLC-5/250. The 1771-SN is compatible with any 1771 I/O chassis and it can be installed in any I/O module slot in the chassis. The scanner module can be connected to remote I/O adapters via a twinaxial cable. The 1771-SN can be used to expand a system to a maximum of 896 digital I/Os. It can interface with a maximum of 16 remote I/O adapters that support discrete transfer. As the response time for remote I/Os is relatively large compared to local I/Os, it is recommended to use the 1771-SN with digital I/Os that do not require rapid response times. Example of such suitable digital I/Os include pilot lights, a thumbwheel switch, and devices for read-outs.
The 1771-SN supports 57.6 kbps data rate with 10,000 feet of cable and 115.2 kbps with 5000 feet of cable. The 1770-CD cable or the equivalent can be used for module interconnection. The module is not compatible with complementary I/O. To prevent damage to the 1771-SN, unused modules should be placed in static-shield bags, connector pins, or a backplane connector should not be touched and operators should discharge themselves by touching any grounded object prior to holding the module. Power to the I/O chassis should be turned off prior to installing the 1771-SN module in the chassis. The working temperature range of the 1771-SN is from 0 to 60 degrees Celsius at 5 to 95% relative humidity. The module draws 1.2 Amps from the chassis backplane and dissipates maximum 7 Watts power. The thermal dissipation is a maximum of 24 BTUs.
