GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-SIM
1771-SIM
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-SIM 1771-SIM//A
Common misspellings:
- l771-SIM
- 177l-SIM
- 1771-S1M
- 1771-SlM
- 1771SIM
The Allen-Bradley 1771-SIM is an input simulation and output indicating module that belongs to the Allen-Bradley 1771 series of I/O modules. The switches on this module simulate open/closed devices. The main function of the Allen-Bradley 1771-SIM input simulation and output indicating module is to transfer data from the module's memory to a specific area (previously designated by the users) in the processor data table. This module does not require any external power supply; the users can supply loop power by the means of a transducer for input. This module uses a block transfer wire to transfer configuration data and it receives analog signals generated by external devices and it can be physically inserted into any 1771 I/O chassis. The main parts of the module are status indicators that show which outputs are active and input simulation switches.
The Allen-Bradley 1771-SIM input simulation and output indicating module requires 8 input simulating switches and 8 output indicators, and a backplane current of 300 milliamps at 5 Volts DC. The environmental conditions are an operating temperature range of 0 to 60 degrees Celsius, a storage temperature of -40 to 85 degrees Celsius, and a relative humidity of 5 to 95%, non-condensing. The altitude can be up to 2000 meters without derating. This module is intended to operate in a Pollution Degree 2 environment and in Overvoltage Category II applications. The backplane power of the Allen-Bradley 1771-SIM input simulation and output indicating module is powered by the chassis supply. Besides the backplane current, there is no other accessible terminal.
