GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-RTP1
1771-RTP1
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-RTP1 1771-RTP1//A
Common misspellings:
- l771-RTP1
- 177l-RTP1
- 1771-RTPl
- 1771RTP1
The 1771-RTP1 PLC 5 Remote Termination Panel and Cable by Allen Bradley contains a Cold Junction Compensation for Thermocouple Input feature; it can be used for Voltage inputs when accompanied by a resistor, and additionally contains eight analog inputs and eight analog outputs. This part follows several particular EMC standards, namely EN 50081-2 EMC - Generic Emission Standard, Part 2 - Industrial Environment and EN 50082-2 EMC – Generic Immunity Standard, Part 2 - Industrial Environment. An electric arc can occur if cables are being connected or disconnected while power is being applied to the module or to any device on the network. To avoid this, cut all power on the network before proceeding.
The 1771-RTP1 unit has a number of agency certifications, including Groups A, B, C, D (UL 1604, C-UL under CSA C22.2 no. 213) and UL 508, C-UL under CSA C22.2 no. 142, Class I, Div. 2. With an ED immunity of 6 kV on contact and 8 kV through the air, this unit can operate at temperatures as high as 140 degrees Fahrenheit and as low as 32, and can be stored anywhere in the temperature range of -40 to 185 degrees Fahrenheit and up to 95% humidity without condensing. It weighs around 0.6 pounds (0.3 kilograms) with a size of 4.5 x 12.4 x 6.3 inches (115 x 317 x 160 millimeters).
