GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-RT44
1771-RT44
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-RT44 1771-RT44//A
Common misspellings:
- l771-RT44
- 177l-RT44
- 1771-RTA4
- 1771-RT4A
- 1771RT44
The Allen Bradley 1771-RT44 is a PLC 5 Remote Termination Panel and Cable, equipped with 4 analog inputs and 4 analog outputs. Its operating temperature can go as low as 0 degrees Celsius and as high as 60 degrees Celsius (32 to 140 degrees Fahrenheit), while its storage temperatures lie between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit). Without condensation, the 1771-RT44 can hold a relative humidity anywhere between 5% and 95%. Its dimensions are 3.0 x 3.5 x 2.3 inches (75 x 89 x 58 millimeters), and it weighs approximately 0.3 pounds (0.1 kg)
With an operating shock of 30.0 g (3 pulses, 11 milliseconds), a nonoperating shock of 50.0 g (3 pulses, 11 milliseconds), and an operating frequency of 47 to 63 Hertz, this unit is supplied as open type equipment and comes prepared for use in an industrial environment, though it is not to exceed Pollution 2 (as defined in EN / IEC0664-1) when applied in a Zone 2 environment. This part includes current inputs and can also be used for voltage inputs (with a resistor). The 1771-RT44 has ESD immunity of 6 kV contact discharges and 8 kV air discharges and should be accessible only by means of the appliance.
