GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-P6S1
1771-P6S1
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-P6S1 1771-P6S1//A
Common misspellings:
- l771-P6S1
- 177l-P6S1
- 1771-P6Sl
- 1771P6S1
The Allen-Bradley 1771-P6S1 is a power supply module that belongs to the 1771 Power Supplies series for PLC-5 Programmable Controllers. It is an auxiliary power supply with a nominal input voltage rating of 200 Volts AC. The input voltage range for this part number is from 120 to 140 Volts AC. It also has 56W of maximum real input power. At the back of this power supply is a pair of jumpers that allow both remote and local sensing support. Available for different unit configurations, the jumper selection offers proper voltage regulation. At minimum, a PLC-5 system (including the 1771-P6S1) has I/O modules and a programmable controller in an individual chassis with a power supply. All PLC-5 controllers also come with on-board remote I/O scanner slots. A 1771-SDN DeviceNet Scanner Module must be added in order to support a DeviceNet I/O scanner slot. Allen-Bradley provides various I/O modules and it actually has over 10 million 1771 I/O modules to put in applications internationally.
The 1771-P6S1 power supply operates on an AC input rating of 220 to 240 Volts. The maximum apparent input power for this power supply is 89 VA while its maximum Xformer load is 140 VA. The backplane output current rating for the 1771-P6S1 is 8 Amps at 5 Volts DC. Its frequency rating is at 47 to 63 Hertz and comes with a default 5-position terminal block. It takes up 1 slot in the I/O chassis side plate and it uses the 1771-CT cabling. It can also be mounted either as a single unit or with another parallel power supply if more power is needed.
