GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-P6S
1771-P6S
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-P6S 1771-P6S//A1771-P6S//B
Common misspellings:
- l771-P6S
- 177l-P6S
- 1771P6S
The 1771-P6S is an auxiliary power supply module that is designed to be used along with the 1771 systems made by Allen-Bradley. They are installed in the I/O chassis of the 1771 modules. The 1771-P6S generates a shutdown signal whenever the input supply voltage drops below a predetermined value. The input line voltage for the module is 220 Volts AC and it can vary from 194 Volts AC to 264 Volts AC. The maximum power of the module is 56 Watts. The shutdown signal which is generated turns off only when the input voltage has dropped down to the specified limits. This helps to retain only the valid data in the memory module. The module can be configured to support remote or local sensing based on the jumper settings.
The 1771-P6S provides an output voltage of 5 Volts DC and 8 Amps. Users can also connect two power supplies in parallel to provide more output power using the supplied parallel cable and setup communication. The ambient operating temperature of the module should be between 0 to 60 degrees Celsius in a non-condensing humid environment having a humidity range of 5 to 95%. While installing the module, make sure to follow the necessary safety guidelines specified by the manufacturer. The device is also sensitive to electrostatic discharge and users should wear electrostatic wrist straps to prevent damage due to ESD. The device is UL listed and CE and CSA certified. Make sure to check all the connections before the power supply to the system is turned on to prevent any improper connections and damage to the equipment.
