GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-P5K
1771-P5K
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-P5K 1771-P5K//A
Common misspellings:
- l771-P5K
- 177l-P5K
- 1771P5K
The Allen-Bradley 1771-P5K is a conformal-coated power supply module which is installed in the 2 slots of the 1771 module which is also manufactured by Allen-Bradley. The 1771-P5K has an input voltage range of 20.5 Volts DC to 30 Volts DC and the nominal input voltage is 24 Volts DC. The module has a power output of 5 Volts DC and 8 Amps. The module is operated within a temperature range of 0 to 60 degrees Celsius and in a non-condensing humid environment with 5 to 95% relative humidity. The conformal coating creates a protective film which seals the humidity and other contaminants and which protects the module from the changes in humidity and also prevents corrosion to the circuit board. This will increase the life of the product and hence the device can be used in corrosive environments.
The device can act as a primary or secondary source or power supply to power the various modules connected to the I/O chassis of the system. It is to be installed in 2 slots in the module. When connecting the device, it is recommended to turn off the input supply to prevent damage due to shock and also to prevent electric shock to the personnel. Operators have to follow the safety guidelines when replacing the module to prevent injury and damage. If a greater current than normal is required, users can connect the 1771-P5K module in parallel with another 1771-P5K power supply module by using the provided cable. The power supply should not be connected in parallel with any other power supply.
