GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-P5
1771-P5
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-P5 1771-P5//A
Common misspellings:
- l771-P5
- 177l-P5
- 1771P5
The 1771-P5 is a power supply module for the 1771 series of PLCs which are manufactured by Allen-Bradley. They have an input rating of 20 to 30 Volts DC and the output voltage is 5.06 Volts DC. It can be installed in the I/O chassis of the 1771 module and it occupies 2 slots in the chassis. The ambient operating temperature for the 1771-P5 should be between 0 to 60 degrees Celsius and the storage temperature range should be between -40 to 85 degrees Celsius. The humidity of the environment should be non-condensing and between 5 and 95%.
The 1771-P5 module can be connected in parallel with another 1771-P5 module with a 1771-CT parallel cable. The weight of the 1771-P5 module is approximately 1.18 kilograms. The power supply module is UL and CSA/H certified. Users can connect the power supply module to power the external peripheral devices on the I/O chassis. The input power rating of the module is 57 W. It can supply the backplane output current of up to 8 Amps at 5 Volts DC. It has a built-in normal blow fuse for protection which has a rating of 5 Amps and 32 Volts DC. The nominal input voltage for the module is 24 Volts DC. When installing the power supply, it is recommended that the input power be turned off first to prevent any injury and hazard from electric shock because this can also damage the equipment . Users also need to comply with the local electrical safety regulations and relevant ESD guidelines.
