GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-P4S1
1771-P4S1
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-P4S1 1771-P4S1//A1771-P4S1//B
Common misspellings:
- l771-P4S1
- 177l-P4S1
- 1771-PAS1
- 1771-P4Sl
- 1771P4S1
The 1771-P4S1 is a module manufactured by Allen-Bradley for the 1771 PLC 5 series. It is a power supply module which is used to power the peripheral devices connected to the chassis of Allen-Bradley 1771 equipment. The 1771-P4S1 outputs a voltage of 5 Volts DC and the output current is 8 Amps. The input voltage for the 1771-P4S1 is 100 Volts AC at 1.06 Amps. The voltage range for the input is 85 to 120 Volts AC RMS. The maximum power dissipation of the 1771-P4S1 is 16 Watts and the thermal dissipation is 47.8 BTU/hour. The operating ambient temperature of the 1771-P4S1 is as per the IEC 60068 regulation and is tested to operate in cold and in dry heat conditions.
The temperature range is from 0 to 60 degrees Celsius and the storage temperature range is -25 to 80 degrees Celsius. It can withstand a non-condensing humidity of 5 to 95%. The 1771-P4S1 is tested to withstand an isolation voltage of 1000 Volts AC for 60 seconds. The device has an open style enclosure and does not have any IP rating. The 1771-P4S1 is UL listed, CE certified as per all applicable directives and it is also C-UL and C-Tick certified for industrial emissions and safety. When connecting the power supply, it is important to note that the input power is turned off and the system is completely discharged to prevent any injury from electric shock. It is also essential to check the connections before turning on the power supply to the system.
