GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-OZL
1771-OZL
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-OZL 1771-OZL//A
Common misspellings:
- l771-OZL
- 177l-OZL
- 1771-0ZL
- 1771-OZ1
- 1771OZL
The 1771-OZL is a digital I/O relay contact output module that belongs to the 1771 series, designed by Allen-Bradley. This module should be used for switching resistive loads only. It is not suitable to work with inductive or capacitive loads. The Allen-Bradley 1771-OZL digital I/O relay contact output module operates with a voltage rating of 0 to 24 Volts AC or 0 to 24 Volts DC, a current rating and surge current of 100 milliamperes per output and a power rating of 2.4 Watts per output. It has a thermal dissipation of maximum 7.6 BTU on an hour and a minimum 6.9 BTU on an hour. The Allen-Bradley 1771-OZL digital I/O relay contact output module has dry-reed relays, which are hermetically sealed, this allows them to withstand harsh environments. This type of relays is intended for low-power and low-voltages applications. With dry-reed relays it is utterly important to avoid surges since they could cause damages and reduce the lives of the relays. In case surges exist, they should not exceed either the voltage or current rating of the module.
The Allen-Bradley 1771-OZL digital I/O relay contact output module is highly sensitive to electrostatic discharges, it is recommended to work on a static-free workstation while installing it. The environmental conditions are an operating temperature of 0 to 60 degrees Celsius and a relative humidity without condensation of 5 to 95%. The Allen-Bradley 1771-OZL digital I/O relay contact output module has a status indicator integrated for each one of the outputs and it also requires a wiring arm to be connected to the chassis.
