GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-OW16K
1771-OW16K
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-OW16K 1771-OW16K//A1771-OW16K//B
Common misspellings:
- l771-OW16K
- 177l-OW16K
- 1771-0W16K
- 1771-OWl6K
- 1771OW16K
The 1771-OW16K is an Allen-Bradley electromechanical module that comes with 16 outputs. This relay contact output gadget, which belongs to the 1771 series, is also outfitted with a conformal coating, making it durable and reliable. This model can be used in extreme environmental settings, including those exposed to humidity as well as contaminants like acid, ammonia, and chlorine, in addition to nitrogen. The 1771-OW16K normally uses a 1771-AM1 chassis. It can also use a 1771-AM2 or 1771-AIB or even later chassis. The 1771-OW16K does not have a surge limiting circulatory system. This means operators can use surge limiting devices to control capacitive, resistive, as well as inductive loads. This electromechanical relay contact occupies only one slot. What is more, the 1771-OW16K can be slotted into any chassis slot with the exception of the leftmost connector (which is reserved for adapters and processors). It is highly reliable and suitable for use in different industrial settings.
To avoid backplane-related damage as well as possible system faults, users are advised to place the correct key. The key bands should be placed between the second and fourth pin. It must also be positioned between pins 32 and 34. Users can only change these locations if the next system design necessitates the addition of a different kind of module. For users to power the 1771-OW16K’s relay coils, they will need to apply a 1.3 Amps maximum load current from the chassis power supply. This AC/DC contact module comes with a 1440VA maximum continuous current for AC and 1280 Watts for DC. Its switching frequency is 1/3 Hertz at the maximum load, while the operate/release time is rated at 10 milliseconds maximum. Plus, the contact possesses 16 LEDS status indicators which brighten up whenever the relay is energized. Surge limiting devices can be incorporated to control resistive, capacitive, and inductive loads.
