GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-OM
1771-OM
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-OM 1771-OM//A
Common misspellings:
- l771-OM
- 177l-OM
- 1771-0M
- 1771OM
The Rockwell automation/ Allen Bradley 1771-OM is an alternating current output module with 8 output channels. The module draws a current of 225 milliamperes from the backplane and operates within a voltage of 184 to 250 Volts AC. At 220 Volts AC, the 1771-OM module has a minimum per output load current of 60 milliamperes. The per output and per module maximum surge current for the 1771-OM module is 20 Amps repeated each 10 seconds for 100 milliseconds. Additionally, this module has a maximum on-state voltage drop of 1.6 Volts at two milliseconds, a maximum off-state current leakage of 2 milliamperes per output channel, and a signal delay of 1.0 milliseconds and 8.3 milliseconds for the off-on, on-off operations respectively.
The 1771-OM has a power dissipation rating ranging between 1.2 Watts and 13.2 Watts, a thermal dissipation rating of 4.1 BTU per hour (minimum) and 45.1 BTU per hour (maximum). The isolation voltage for the 1771-OM module, is defined by the UL standard 508, CSA standard C22.2 No. 142. For optimal performance of the 1771-OM AC output module, it should be operated within an industrial environment that has a temperature of between 0 and 60 degrees Celsius and a relative humidity (without condensation) ranging between 5 and 95 percent. When not in operation, the module should be stored at temperatures of between -40 and +85 degrees Celsius. The 1771-OM module uses the 1771-WA field wiring arm which supports 14-gauge wire size with a maximum insulation of 1.2 millimeters, and a maximum wiring arm screw torque of 9-inch pounds. For monitoring and troubleshooting. The module has LED indicators on its front panel. The 1771-OM module is keyed to the backplane using keying bands between 6 and 8, 28 and 30.
