GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-OFE2
1771-OFE2
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-OFE2 1771-OFE2//A1771-OFE2//B
Common misspellings:
- l771-OFE2
- 177l-OFE2
- 1771-0FE2
- 1771OFE2
The 1771-OFE2 is manufactured by Allen Bradley which is an analog output module. The output of the module is in current form. The output current range for the module is 4 to 20 milliAmps. The 1771-OFE2 has four differential isolated outputs and the module has a self check on startup to find faults and display them by turning ON a fault indicator LED to indicate the status of the module. The module has a power requirement of 5 Volts DC at 1.5 Amperes and the power is received from the chassis backplane or an external power supply. Care must be taken that the module must not be inserted or removed from the I/O modules when the power of the system is turned ON. If these instructions are not followed it can damage the equipments and the modules. The configuration jumpers on the module are installed in the factory and they do not require any additional configuration. The recommended operating temperature for the module is 0 to 60 degrees Celsius and the module storage temperature should be -40 to 85 degrees Celsius. The humidity should be non condensing from 5 to 95%. This module has a CSA certification and it is UL listed and CE marked for all applicable derivatives. The power dissipation of the module is 7.9 Watts. The module should be installed and replaced by persons trained and are familiar with the system to prevent any damage to the equipment. The 1771-OFE2 is EMC certified and can be used in pollution degree 2 industrial environments.
