GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-ODC
1771-ODC
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-ODC 1771-ODC//A1771-ODC//B1771-ODC//C
Common misspellings:
- l771-ODC
- 177l-ODC
- 1771-0DC
- 1771ODC
The Allen Bradley 1771-ODC is an AC isolated output module with 6 outputs and a backplane current rating of 225 milliamperes. The 1771-ODC is an earlier version of the 1771-OD AC isolated output module which also had 16 outputs. Connections to the 1771-ODC module are made through the 1771-WD wiring arm. The module occupies a slot in the 1771 Input Output chassis and is keyed to the backplane using keying bands between 30 & 32 and 4 & 6. At a frequency range of 10 to 500 Hertz, the 1771-ODC module can accommodate a vibration not exceeding 2g. The 1771-ODC module accommodates a maximum cable length of 1000 feet, an on-state voltage drop of 2 Volts at 100 mA, and an off-state leakage current not exceeding 5 mA at a maximum voltage of 138 Volts alternating current. The 1771-ODC AC isolated output module is meant to be operated at temperatures not exceeding 60 degree Celsius and not less than 0 degrees Celsius. The non-condensing operating humidity level for the 1771-ODC module is between 5 to 95 percent. The outputs for the 1771-ODC are individually fused. When replacing the fuse or the module, or even when installing the module, make sure to completely switch off the power supply to the Input Output chassis. The 1771-ODC module dissipates a maximum and minimum power of 13.2 and 1.2 Watts respectively. For monitoring and easy error detection, the module has twelve LED indicators with the first six (from top) corresponding to each output channel while the others provide for the blown fuse status of each output channel.
