GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-OD16
1771-OD16
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-OD16 1771-OD16//A1771-OD16//B
Common misspellings:
- l771-OD16
- 177l-OD16
- 1771-0D16
- 1771-ODl6
- 1771OD16
The 1771-OD16 is a digital AC isolated module from Rockwell automation/ Allen Bradley. The module has 16 outputs with each output channel capable of controlling the off/on status of solenoids, AC motor starters, or indicators. The 1771-OD16 module has a metal-oxide varistor between sets of terminals which helps in keeping the high-voltage transients in check. The 1771-OD16 modules can be installed in either the 1771-A1B, 1771-A2B, 1771-A3B or the 1771-A4B Input Output chassis. The module operates at a voltage range of between 74 and 138 Volts alternating current which at a frequency of 47 to 63 Hertz. The 1771-OD16 module has a continuous per channel current of between 5 mA and 2 Amperes, 8 amperes per module, and a peak current surge of 20 amperes repeated each 2 seconds for 100 milliseconds. The 1771-OD16 digital AC isolated module has a maximum per output on-state voltage drop of 5.8 Volts RMS when the load current is less than 50 milliamperes and 1.5 Volts RMS when the load current is greater than 50 milliamperes. At 138 Volts AC, the 1771-OD16 module has a maximum off-state leakage current of 3.0 milliamperes.
At zero cross switching, the module has a common on-off and off-on signal delay of 8.3 and 10 milliseconds at 60 and 50 Hertz respectively. The 1771-OD16 exerts a current load of 250 milliamperes on the backplane. Additionally, the module has a maximum power and thermal dissipation rating of 13.25 Watts and 45.2 BTU per hour respectively and a min thermal and power dissipation rating of 4.3 BTU per hour and 1.25 Watts. The 1771-OD16 module has an isolation voltage tested at 2500 Volts DC for 1 sec. The 3A 2AG slow-blo fuses are recommended to be used in the module at 1 fuse per channel. Pins 22 to 24 and 34 to 36 are used when keying the 1771-OD16 module to the backplane.
