GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-NBV1
1771-NBV1
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-NBV1 1771-NBV1//A1771-NBV1//B1771-NBV1//C
Common misspellings:
- l771-NBV1
- 177l-NBV1
- 1771-N8V1
- 1771-NBVl
- 1771NBV1
The Allen-Bradley/ Rockwell Automation 1771-NBV1 is a PLC5 high resolution analog combination module. As part of the Allen-Bradley 1771-N series of combination modules, the 1771-NBV1 combination module has 8 input/output channels, six of which are for input and the other 2 are for output. The 1771-NBV1 is an intelligent block transfer module which is mainly used to act as an interface for analog signals with PLC3/5 programmable controllers by Allen-Bradley that can perform block transfers. For proper performance, the 1771-NBV1 module needs just one slot in the I/O chassis with no need for an external power supply. However, the 1771-NBV1 module needs two cable assemblies to make its connection to the RTP. The cable assemblies that are recommended for use in this case include the 1771-NC6 that is 6 ft long and the 1771-NC15 which is 15 ft long.
The 1771-NBV1 module draws a 1.6A backplane current and it needs about 9s or less time to detect open circuits on the input. The 1771-NBV1 module offers an overvoltage protection on the inputs of 140V AC RMS continuous. During voltage in, this 1771-NBV1 module uses the RTP4 but it is recommended to use the 1771-RTP3 during current In. In addition, before inserting the module or removing it from the I/O chassis, the power needs to be disconnected because this device dissipates 8W while operating. However, from the factory, the 1771-NBV1 module comes with a 1771-WH wiring arm and it performs optimally in an industrial environment whose temperature range is 32-140oF at 5-95% non-condensing humidity.
