GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-IVN
1771-IVN
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-IVN 1771-IVN//A1771-IVN//B1771-IVN//C
Common misspellings:
- l771-IVN
- 177l-IVN
- 1771-1VN
- 1771-lVN
- 1771IVN
The 1771-IVN is a DC input module from Allen Bradley. The module has 32 inputs per module and it is installed in the 1771 Input and Output chassis. The 1771-IVN has an input voltage ranging from 10-30V DC, an input current (nominal) of 4.5 milliamperes at +/-10V DC and it has a 1.7 milliamperes minimum off-state current. The 1771-IVN has an impedance (input) of 2.2 kilo ohms, a high-to-low and low-to-high input signal delay of 6 milliseconds, +/- 2 milliseconds. Additionally, the module has a minimum power dissipation of 1.5 watts and a maximum power dissipation rating of 15.6 watts. The 1771-IVN draws a current of 280 milliamperes at 5V DC.
When keying the 1771-IVN module, use pins 14-16 and pins 30-32 for the lower and the upper connector. The module has a maximum and minimum off and on-state voltage of 5V DC and 10V DC, respectively. The isolation voltage for the 1771-IVN is 500V tested for 60 seconds. The 1771-IVN has an operating shock rating of 30g and a non-operating shock rating of 50g. The module operates at environments that have a vibration of 2g at 10-500 hertz.
The 1771-IVN module uses the 1771-WN field wiring arm which has a 7-9-inch pounds screw torque. For wiring purposes, the 1771-IVN uses a wire with a maximum strand of 2mm plus an insulation of 1.2mm. The module has 32 LED indicators which help monitor the status of the 32 inputs and eases the troubleshooting process. The 1771-IVN should be operated within certified industrial environment.
