GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-IR
1771-IR
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-IR 1771-IR//A1771-IR//B1771-IR//C
Common misspellings:
- l771-IR
- 177l-IR
- 1771-1R
- 1771-lR
- 1771IR
The 1771-IR is an RTD input module made by Rockwell Automation/Allen-Bradley. The module puts an 800-milliampere current load on the chassis backplane. The 1771-IR has a sensor resistance of 100 ohms platinum and 10 ohms copper or other sensors that support reporting in ohms. The module has an On-state signal delay (direct current) of 10 milliseconds, and a 50 milliseconds Off-state signal delay. Additionally, the 1771-IR has an On-state alternating current signal delay of 45 milliseconds plus or minus 15ms. The 1771-IR has six 3-wired RTD inputs and it does not require an external power supply. The 1771-IR uses the 1771-WF wiring arm.
The 1771-IR module can support data formats in natural binary, ohm readings, or in BCD actual temperature. The module has a 16-bits resolution and a 50 milliseconds channel update time for the 8 channels. The 1771-IR is rack mountable where it is installed on any available slot in the Input/Output module and it can be monitored through the special LED indicators on its front panel. The module is keyed using pins 10-12, and 28-30, and is CSA class I, division 2, and Groups A, B, C, D certified.
The 1771-IR has a common mode rejection of 120db at 60 hertz to a maximum of 1000V peak, a common mode impedance >10 mega ohms, and a normal mode rejection of 60db at 60 hertz. The 1771-IR has an overvoltage protection of 120V RMS (continuous). The module’s power dissipation rating is 4.75 watts (max) and its thermal dissipation is 16.2 BTU per hour. The 1771-IR has a temperature coefficient of +50ppm per degree Celsius at full scale range.
