GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-IKC
1771-IKC
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-IKC 1771-IKC//A
Common misspellings:
- l771-IKC
- 177l-IKC
- 1771-1KC
- 1771-lKC
- 1771IKC
The 1771-IKC is an encoder/counter module from Allen Bradley. This module has a power supply rating of 12 to 24 Volts Direct Current. The module uses the 1771-WD wiring arm. This minimizes wiring requirements in case the 1771-IKC encoder/counter module or any other module/device interfaced with it needs to be replaced. The 1771-IKC has 5 Volts direct current open-collector outputs which have a current of 500 milliAmps per output. The 1771-IKC draws a current of 1200 milliamperes from the backplane and has a maximum 50 kilohertz input frequency (maximum). Additionally, the module has an Alternating Current signal off delay (typical) of 24 milliseconds +/- 10 milliseconds and a Direct Current signal off delay (typical) of 20 milliseconds +/- 9 milliseconds. The 1771-IKC encoder/ counter module has a module update time rating of 1.3 milliseconds. The 1771-IKC has 2 slots and accepts inputs from single ended incremental encoder or a single-channel device. The module operates best within an environment with a non-condensing relative humidity not exceeding 95% and not below 5%. The 1771-IKC has an operating temperature rating of between 0 and 60 degrees Celsius. When not in operation the module has storage temperature rating not exceeding 85 degrees Celsius and not below -40 degrees Celsius.
For monitoring and troubleshooting, the 1771-IKC has LED indicators on its front panel which indicates conditions such as communication status, power, and initialization status. In addition, the module has logical switches which use voltage differences to indicate an Off or On depending on the programming. The switches on the 1771-IKC are also used to select the encoder or the counter option of the module. The 1771-IKC is a Det Norske Veritas (DNV) marine certified.
