GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-IJC
1771-IJC
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-IJC 1771-IJC//A
Common misspellings:
- l771-IJC
- 177l-IJC
- 1771-1JC
- 1771-lJC
- 1771IJC
The 1771-IJC is an encoder/counter module from the Allen Bradley branch of Rockwell automation. The module exerts a current load of 1.2 amperes on the backplane and takes 1.3 milliseconds to update. For facilitate troubleshooting and monitoring of the 1771-IJC and the devices connected to it, the module has LED indicators on its front side. The 1771-IJC has a maximum frequency of 50 Kilohertz. When purchasing the module, make sure you check for alternatives because the 1771-IJC is an earlier version which may not integrate smoothly with other current modules.
For inputs, the 1771-IJC encoder/counter module supports 5 Volts TTL single ended, single channel devices or the differential incremental encoder. The 1771-IJC is wired using the 1771-WB wiring arm which minimizes rewiring needs in case the module or components attached together with the module need to be replaced. The module also has a 5 Volt DC open collector with a current rating of 0.5 Amperes per output. The 1771-IJC has two slots. The 1771-IJC encoder/ counter module has a 24 milliseconds typical alternating current signal off delay plus an allowance of +-10 milliseconds. The module is recommended to be used in a dry and clean environment which has a relative humidity between 5-95% without condensation. Additionally, for maximum performance, the module must be operated at a temperature ranging from 0 to 60 degrees Celsius. The 1771-IJC has a typical Direct Current signal off delay of 20 milliseconds +/- 9 milliseconds. When not in operation, the module is recommended to be stored within temperatures not exceeding 85 degrees Celsius and not below -40 degrees Celsius.
