GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-IFF
1771-IFF
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-IFF 1771-IFF//A
Common misspellings:
- l771-IFF
- 177l-IFF
- 1771-1FF
- 1771-lFF
- 1771IFF
The 1771-IFF analog input module is a product by Allen-Bradley and Rockwell Automation. As a PLC-5 analog input module, 1771-IFF interfaces analog inputs with the corresponding processor systems via block transfer programming. The 1771-IFF uses A 16-bit resolution and it also performs the conversions as well as reverse conversions for the purposes of interfacing analog signals with the data table values in the PLC processor. The 1771-IFF input module is very useful for various applications that include sensing, temperature, pressure or level sensing, and flow metering.
Like all other A-Series input modules, the 1771-IFF module has 16 single-ended or 8 differential inputs that are selectable. The 1771-IFF also has natural binary scaling or the BCD scaling for data format of up to +9999. The nominal input voltage ranges are 0-5VDC, 1-5V DC, and -5-5V DC, as well as -10-10V DC while the nominal input current input ranges include 4-20mA, 0-20mA, -20-20mA and -40-40mA. The 1771-IFF’s backplane current load is 750mA and the channel update time is 5ms for 8 of its channels or 10ms for 16 of the channels. Its maximum power dissipation is 2.5W and the thermal dissipation is 8.52 BTU/hr.
For replacing the 1771-IFF input module, there is a 1771-WG wiring arm that comes with the module and eliminates the need to disconnect wiring in the processor. In any case, the 1771-IFF module is compatible with any 1771 I/O chassis and it only needs one slot during installation. Some additional features useful for the 1771-IFF module include opto-electrical isolation that protects it from electrical transients and also the input filters that reduce electrical noise.
