GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-IAN
1771-IAN
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-IAN 1771-IAN//A
Common misspellings:
- l771-IAN
- 177l-IAN
- 1771-1AN
- 1771-lAN
- 1771IAN
With an AC capacity of 120 V, the Allen-Bradley 1771-IAN sink input device and this means that it requires a source output for the positive voltage path. The sink input device provides a grounding path and is to be used in a series with the B 1771I/O chassis. The 1771-IAN may not be used with 2-slot addressing and its use with the single-slot addressing is restricted. However, it has unrestricted use for the 11/2 –slot addressing.
The 1771-IAN module comes with 32 inputs per module and an equal number of status indicators on its front plate which represent the inputs’ control status. Therefore, when each indicator flashes, that means that voltage is present at the corresponding input. The 1771-IAN requires 280mA from the output of its supply and users will need to calculate the power requirements correctly to avoid over-loading the backplane and the backplane power supply. Its voltage range is between 85 and 135V of alternating current at 50/60Hz and its maximum off-state voltage is 30V AC. Keying for the 1771-IAN module may be done from nearly any chassis slot except those on the leftmost side which is for adaptors and/or processors. Users can change the keying, but generally it is between the ranges of 16 and 18 or of 20 and 22.
For installation of this module, make sure the module card is guiding from both the top and the bottom of the chassis to put it into position. After that, limit the maximum adjacent slot power dissipation to 10W because each 1771-IAN condenses 2 full module groups (22 inputs) into each slot of the chassis. It is possible to use multiple power supplies but do not exceed the specified isolation voltage. A different power supply can be used to each of the commons, 0;1;2;3; but be sure to calculate the voltage requirements properly to avoid overloading the chassis backplane power supply.
