GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-HSAR
1771-HSAR
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-HSAR 1771-HSAR//A
Common misspellings:
- l771-HSAR
- 177l-HSAR
- 1771HSAR
The Allen-Bradley 1771-HSAR is an IMC Servo Controller Module that is designed with ADV. The PLC5 controller module has a lithium battery memory cartridge that is used to store the application programs for the controller system and the AMP parameters as well. The 1771-HSAR uses the lithium battery for backing up the memory module in which the lithium battery can effectively maintain data for up to 10 years despite the battery’s typical 3-year lifespan. The 1771-HSAR also comes with a power supply module whose electrical rating is between 120V AC and 220V AC while it is connected through a 1771-CAS power connector cable.
The 1771-HSAR uses an AUX FDBK 15-pin connector that provides power to an auxiliary encoder that is connected to it. The connector is also used to receive feedback signals from the auxiliary encoder and from a resolver rotor. The 1771-HSAR has a 9-pin RS-232 connector for testing and debugging MML programs and for downloading or uploading MML programs and AMP parameters. For connection, the 1771-HSAR uses cables with varied lengths but it has the 1771-PS7 power connector cable for connection. It also uses the 1771-CAP Axis E-stop connector cable for link to the Axis E-Stop connector of the termination panel. The AUX FDBK 1771-CAPA connector cable connects the 1771-HSAR to the auxiliary feed-back connector of the termination panel while the 1771-CT50 RS-232 connector cable connects the 1771-HSAR to the T35 and the T50 offline development systems. The 1771-HSAR weighs 1kg and operates between 32 and 140 degrees Fahrenheit but store it between -40 and 185 degrees Fahrenheit. Its backplane current is 1.7 Amperes and the pulse capture time is approximately 50-9.999 ms. The 1771-HSAR measures 3.5 inches x 6.5 inches x 2 inches and it comes with two wiring arms, the 1771-WA and the 1771-WB.
