GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-HS
1771-HS
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-HS 1771-HS//A
Common misspellings:
- l771-HS
- 177l-HS
- 1771HS
The Allen-Bradley 1771-HS is an IMC 120 Motion Controller Module. The 1771-HM comes with the 1771-HS module as a memory slot that is pre-installed during the manufacture of the 1771-HS controller module. The pre-installed memory slot has a backup battery power supply which dissipates 3.6V DC. The 1771-HM has a 32KB CMOS RAM which provides storage for the MML program. The 1771-HS motion controller module, is comprised of three servo controller modules located in the 1771 Input Output chassis, an encoder module, a 1771-PS7 power supply module, and a 1771-HM memory cartridge. To receive encoder feedback, feedback signals, E-stop and E-start status signals, the 1771-HS uses the 50-pin connector of the Axis E-stop Input/Output connector. The Axis E-stop Input/Output connector also provides a fast Input/Output power.
The 1771-HS has four green and red indicators on its face to provide an easy way for monitoring and troubleshooting. Additionally, the 1771-HS is connected to the 1771-PS7 power supply via a power connector on its front side using the 1771-CAS power cable. The power supply is shipped together with the module and has a rating of 1A at 120V AC and 2A at 220V AC.
The 1771-HS has an RS-232 connector on its face that provides a port for downloading and uploading the AMP parameters, the MML programs and it also acts as a connection port of the hand-held pendant which is used to debug hardware and MML programs. To connect external modules to the controller, the 1771-HS is shipped with extra server connector cables. The recommended operating temperature for the 1771-HS is 32-140 degrees Fahrenheit and the recommended storage temperature is -40-185 degrees Fahrenheit.
