GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-HMA
1771-HMA
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-HMA 1771-HMA//A
Common misspellings:
- l771-HMA
- 177l-HMA
- 1771HMA
The Allen Bradley 1771-HMA is a 96K CMOS memory cartridge which is used with the IMC 120 system and is MARINE certified. The 1771-HMA is a lithium battery backed memory module; the IMC 120 system must have this memory module for it to function as required. This memory module has 70.5 K available user memory; the battery used to back the 1771-HMA memory module has a maximum lifespan of 10 years, which is made possible by the low self-discharge nature of the battery. This battery is made up of a 1/6 D size lithium wafer cell fixed on the board or has a connector that goes into a socket.
The lithium battery provides a current of 1700 mAh and has a voltage of 3.6 Volts DC. Its capacity provides the perfect back-up source of power for the 1771-HMA CMOS memory cartridge. The 1771-HMA has an approximate weight of 2 pounds and operates optimally at temperatures of between 0 and 60 degrees Celsius. The memory module has a storage temperature rating of between -40 and +85 degrees Celsius and must be operated at humidity levels between 5 and 95 percent without condensation. The battery used to back up the 1771-HMA memory cartridge is mostly used for industrial memory applications. To connect it to the board for the battery to provide the back-up power to the memory module, it uses a 3 Pin connector terminal. The 1771-HMA is used for the storage of MML programs and the AMP parameters. It’s also the overall memory module for the entire IMC 120 servo controller module.
