GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-CX5
1771-CX5
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-CX5 1771-CX5//A
Common misspellings:
- l771-CX5
- 177l-CX5
- 1771CX5
The 1771-CX5 from Allen Bradley is a local Input/Output bus termination cable. The 1771-CX5 measures 5 meters in length and cannot be spliced to make a custom length to cover a distance greater than the 5 meters. The 1771-CX5 interfaces an extended local Input/Output adapter module, for example the 1771-ALX, in an Input/Output chassis with a local I/O scanner port (extended) of the PLC-5 processor using a local Input/Output link. This link is used for extension purposes. For connection, the 1771-CX5 has two ends to initiate connection; one end can be connected to a single port while the other end can be connected to 2 ports or terminals, since it has a dual end connector. This local Input/Output system can accommodate an extension link not exceeding 30.5 meters of cable. When connecting the 1771-CX5, the power supply to the local Input/Output adapter (extended) should be completely turned off to avoid damaging other modules and components on the extension link and to avoid injuring personnel. When connecting the 1771-CX5, the single-end connector goes to the PLC-5 processor’s channel 2. The cable’s other end, with the dual-end connector, is connected to the local Input/Output adapter module on the extension link. Tightening screw on either side of the 1771-CX5 should be used to firmly hold the 1771-CX5 local I/O bus termination cable in place. When the last extended local Input/Output adapter module is reached on the extension link, use the 1771-CX5 local Input/Output terminator for termination. The 1771-CX5 is installed on the dual end part which is exposed.
