GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-ACNR15
1771-ACNR15
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-ACNR15 1771-ACNR15//A1771-ACNR15//B
Common misspellings:
- l771-ACNR15
- 177l-ACNR15
- 1771-ACNRl5
- 1771ACNR15
The 1771-ACNR15 is a ControlNet adaptor module from Allen-Bradley. It is meant to be used with the PLC-5 system. TheControlNet networks provide communication between the 1771 I/O modules and the ControlNet scanner port. It consumes a current of 1A from the backplane at 5V DC. The 1771-ACNR15 operates at a temperature between 0 and 60 degrees Celsius and it has a storage temperature rating of -40-85 degrees Celsius. The module weighs 1 kg and measures approximately 3.5 x 6.5 x 2 inches. The 1771-ACNR15 has a communication rating of 5Mb per second.
The 1771-ACNR15 supports redundant media which has to be connected to Channel A or B from Trunk Line A or B, respectively. When connecting non-redundant media, Channel A should be used. When changing from the 1771-ACNR15 module to the 1771-ACN15 module or vice versa, the module type must be specified in the map table. The processor uses the map table to compare the origin and destination modules during communication. On the front part of the 1771-ACNR15module, there is a status and net address display. There also an OK indicator and ControlNet status indicators which help in the monitoring and troubleshooting duties.
The Allen-Bradley 1771-ACNR15 provides diagnostic messages, a high-speed data transfer, and a Network Access Portwhich enhances local communication. Additionally, the 1771-ACNR15 has a communication reset push button. This helps in restoring communication after an error. The 1771-ACNR15 ControlNet adapter module controls the remote 1771 remote I/O by allowing message exchange between certified third-party devices and Allen-Bradley products.
