GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-ACN15
1771-ACN15
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-ACN15 1771-ACN15//A1771-ACN15//B
Common misspellings:
- l771-ACN15
- 177l-ACN15
- 1771-ACNl5
- 1771ACN15
The 1771-ACN15 is a ControlNet adapter module from Allen-Bradley. The 1771-ACN15 has an operating temperature rating between 0 and 60 degrees Celsius and a storage temperature rating between -40 and 85 degrees Celsius. The ControlNet adapter module has 1 BNC connector for active media operation and a single NAP which is an RJ-48pin with a shield. The 1771-ACN15 module consumes a current of 1A at 5V from the backplane. Additionally, the module should be mounted to the leftmost slot in the 1771 I/O chassis. The 1771-ACN15 uses keying bands to match the module with its correct slot. It accepts keying bands 54-56 for the upper connector and bands 16-18 for the lower connector.
The 1771-ACN15 uses the quad shield RG-6 coaxial cable. The module provides a high-speed data transfer rate of up to 5M bits per second. The 1771-ACN15 uses ½-slot, 1-slot and 2-slot addressing. It has I/O status and a node address display to help in the network diagnostics. For maintenance and troubleshooting, the 1771-ACN15 has a Network Access Port to access the network for local communication purposes. The 1771-ACN15 is used to interface the I/O modules in the 1771 I/O chassis to a ControlNet scanner port through a remote I/O link.
The 1771-ACN15 module is CE and offshore application certified. It has a reset pushbutton which is used to resume communication in the event of an error by resetting the module. The 1771-ACN15 works with a PLC-5 ControlNet controller and the module has a thermal dissipation rating of 17.06BTU/Hr.
