GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-ACN
1771-ACN
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-ACN 1771-ACN//A1771-ACN//B
Common misspellings:
- l771-ACN
- 177l-ACN
- 1771ACN
The Allen-Bradley 1771-ACN is a ControlNet adaptor module. The module enhances the exchange of information between certified third-party products and Allen-Bradley products. The 1771-ACN has a high-speed data transfer rate and diagnostic messages. The NAP (Network Access Port) makes communication possible through the local communication network. The PLC-5/40C and PLC-5/20 are compatible with the 1771-ACN module. The 1771-ACN has a status display, ControlNet status indicators, commination rest push buttons, and one ControlNet connector. At the top of the 1771-ACN module there are module net address assemblies.
For easier monitoring and troubleshooting of the 1771-ACN module, the OK indicator is located on the face of the module. The net address status, which is an alphanumeric display, indicates an error during operation or initialization. The reset push button is used to revert the module back to normal when a communication error occurs. A reset is only possible when the RSET function is active. When the backplane switch is in the PRL position, a reset is also possible. The 1771-ACN is connected to the ControlNet network with either a straight T-tap (1786-TPS)/ Y-tap (1786-TPYS), a right-angled T-tap (1786-TPR), or a right-angled Y-tap (1786-TPYR)
The free word allocated to an adjacent I/O module slot is used by the 1771-ACN module to address a 32-point I/O module in an I/O group containing one slot. The 1771-ACN draws a backplane current of 1A at 5V. The module should be mounted on the far left slot in the I/O chassis. The upper keying band connectors should be between bands 54-56 and the lower connectors between bands 16-18.
