GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » PLC-5 » You are here: 1771-A3B1
1771-A3B1
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1771-A3B1 1771-A3B1//A1771-A3B1//B
Common misspellings:
- l771-A3B1
- 177l-A3B1
- 1771-A381
- 1771-A3Bl
- 1771A3B1
The Allen-Bradley 1771-A3B1 is a universal I/O chassis that isused for mounting the 1771 I/O modules. It supports only the back panel mounting type and it has 12 I/O mounting slots. The 1771-A3B1 is a standalone chassis and it weighs 5.7 kgs. When mounting the 1771 I/O modules onto the chassis, the electrical requirement of the modules should be taken into consideration. The modules should be mounted from right to left.
The spacing guidelines should be adhered to when mounting modules on the 1771-A3B1. Four inches of space should be left between the 1771-A3B1 chassis enclosure walls and a major component, 6 inches should be the minimum space between the major components in the vertical position, and a spacing of 4 inches should be left between the major components when mounted horizontally. Additionally, a spacing of 6 inches should be left between the top or bottom of the 1771-A3B1 chassis enclosure and the major 1771 I/O modules when mounted vertically and 6 inches should be left free between the wiring ducts and a major component.
The 1771-A3B1 is purposely intended for use in an industrial environment which has a non-condensing relative humidly range of 5-95%. The 1771-A3B1 chassis has a non-operating temperature rating of -40-85 degrees Celsius. The module approximately measure 315mm by 483mm by 193mm. The 1771-A3B1 operates in environments that have a temperature not exceeding 60 degrees Celsius. In case of expansions, the 1771-A3B1 can be replaced with ease with a bigger chassis. The 1771-P1, 1771-P2, 1771-P7 and the 1771-PS7 power supplies can only be mounted on the right-side plate of the 1771-A3B1 chassis.
