GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: Logix5573
Logix5573
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the Logix5573 Logix5573//A
Common misspellings:
- 1ogix5573
- L0gix5573
- Logix5573
The Logix5573 is a standard logic controller module with a conformal coating from the Logix 5000 family of controllers manufactured by Allen-Bradley/Rockwell Automation. This open-type controller weighs approximately 0.25 kilograms (0.55 pounds) and is made to be installed in the 1756 chassis. The users have the ability to choose the slot they want to use for installation as well as the ability to install multiple controllers in a single chassis. The controller has 8 MB memory and 0.98 MB I/O memory, and its processors have enough speed and memory to support high-performance applications. The controller draws a current of 5 mA at 1.2 Volts DC, and 800 mA at 5.1 Volts DC. The Logix5573 has a maximum of 128,000 I/O which can be used with a maximum 4,000 analog I/O or up to 128,000 digital I/O. The controller dissipates 2.5 Watts of power and it has 8.5 BTU of thermal dissipation per hour. In addition to this, the controller is protected with 30 Volts of continuous isolation voltage which was tested at 500 Volts AC for 60 seconds.
The Logix5573 comes with 1 built-in USB 2.0 full-speed communication port, and it has the capability to perform 32 tasks and 100 programs per periodic task. The controller can be programmed using Relay Ladder, Structured Text, Function Block Diagram, and Sequential Function Chart (SFC) programming languages. The controller can be upgraded with 1 GB SD (Secure Digital) card which improves the integrity and completes transfers faster. What adds to the appeal of this controller is the ESM (Energy Storage Module) which saves time and relieves the user of having to maintain and replace lithium batteries. The on-board display makes it easy to run controller diagnostics and monitor its operation. The layer of conformal coating provides additional protection for the controller against humidity and other contaminants which can be found in areas with harsh, corrosive atmospheres. The Logix5573 can operate in a place where temperatures reach 60 degrees Celsius (140 degrees Fahrenheit), and it can be stored in an area with temperatures of up to 85 degrees Celsius (185 degrees Fahrenheit). Following the installation and maintenance guidelines will ensure safe and long operation for the controller.
