GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: Logix5565
Logix5565
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the Logix5565 Logix5565//A
Common misspellings:
- 1ogix5565
- L0gix5565
- Logix5565
The Allen Bradley Logix5565 is a ControlLogix 5000 processor with 32 megabytes of user memory. The Logix5565 has an I/O memory of 478 kilobytes. The processor has 1 serial port (RS-232) for communication. Devices are connected with the Logix5565 by using a terminal block which is then interfaced with the processor through a D-shaped port found on the processor. On its faceplate, the Logix5565 has monitoring LED indicators which indicate RUN, FORCE, BAT, Input Output, RS-232, and OK working status of the module. This indicators help in early detection system faults. The Logix5565 ControlLogix 5000 processor can experience an electrical arc, if the battery used to support the volatile memory, the Compact Flash card providing non-volatile memory, or when the Logix5565 is installed or removed from the backplane while the power is still connected. In addition, disconnecting or connecting the serial cable while power to the Logix5565 is still active is likely to cause an electrical arc which can result to an explosion in hazardous locations. The Logix5565 accommodates 128 thousand digital Input Outputs while a maximum of 4 thousand analog Input Outputs can be connected to the Logix5565. The processor is rack mountable where it occupies a single slot in the 1756 Input Output chassis.
The Logix5565 supports 250 (maximum) controller connections. Additionally, the Logix5565 can be adversely affected by static electricity, which will consequently affect normal operation and cause internal damage. To caution the processor from electrostatic discharge, proper grounding measures should be observed. Connector pins should not be touched with bare hands and when storing, the Logix5565 should be stored in a static-safe packaging.
