GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: Logix5564
Logix5564
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the Logix5564 Logix5564//A
Common misspellings:
- 1ogix5564
- L0gix5564
- Logix556A
- Logix5564
The Logix5564 is a programmable ControlLogix controller from Rockwell Automation/Allen Bradley. The controller has 16 megabytes of user memory, a 478 Kilobyte of I/O memory and occupies a single slot in the Input Output chassis. Being a controller/ processor, it occupies the left most slot in the chassis although it can be installed on any slot in the Input Output rack. In an I/O chassis, the leftmost slot is always meant to mount processors and controllers. The user memory is volatile and is supported by a mounted battery. Where non-volatile memory is required, the Logix5564 supports CompactFlash cards from Rockwell automation. The Logix5564 exerts a current load of 14 and 1200 milliamperes on the backplane at 24 and 5 Volts DC respectively. For digital and analog Input Output connections, the Logix5564 accommodates a maximum of 128,000 and 4,000 connections respectively.
The Logix5564 ControlLogix controller provides features to diagnose minor faults such as task overlap, load from non-volatile memory, serial port fault, instruction related faults, and more. When this faults occur before they are diagnosed, the Logix5564 has LED status indicators on its face which also help in monitoring the system. The Logix5564 communicates through networks (Remote I/O, DH+, DeviceNet, ControlNet, Ethernet/IP) which are interfaced to the Logix5564 using an RS-232 serial port which supports ASCII, Modbus via logic, DH-485, DF1 radio modem, and DF1 full/half duplex standards. The Logix5564 handles 100 programs per task and a maximum of 32 tasks. The power and thermal dissipation ratings for the Logix5564 stands at 3.5 Watts and 11.9 BTU per hour, respectively.
