GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-TBCH
1756-TBCH
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-TBCH 1756-TBCH//A
Common misspellings:
- l756-TBCH
- 1756-T8CH
- 1756TBCH
The 1756-TBCH is a removable terminal block for the 1756 I/O modules and it is manufactured by Allen-Bradley. The terminal block is a 36-pin cage with the standard housing. The power dissipation of the module is 6.19 watts and the operating temperature for the device is 0 to 60 degrees Celsius. The 1756-TBCH has a weight of 1 kilogram. The device draws a current of 1.2 Amps at 5 Volts DC and 2.5 mA at 24 Volts DC. The module connects with the I/O module and users should connect no more than 2 wires on a single terminal of the device. Users can connect the 1756-TBCH in any of the ControlLogix chassis and the removable terminal block is required for field side wiring.
The 1756-TBCH can be used for various applications which include high-speed digital processing to process control. While connecting the modules with wires, it is recommended to use a stranded copper wire which can withstand a temperature of 90 degrees Celsius and with a gauge which is greater than 1.2 millimeters. When making the connections to the terminal block, make sure to follow the instructions for connecting the wires and the block as mentioned in the installation manual of the device by the manufacturer. This is essential to ensure the correct operation of the device and for the safety of the equipment. While inserting the wires and tightening the screws, make sure to tighten them to the specified torque rating to prevent breaking the screw due to excessive pressure.
