GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

Mon-Fri 8AM-5PM EST

1756-RM

Rated 0/5 Based on 0 ratings.

Rate your purchase of the 1756-RM

ControlLogix Series Image

ControlLogix Series Image

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Original Packaging

$2413

1 In Stock

1 Yr PDF Supply warranty

What is Original Packaging?

Ships .

Refurbished

$830

Save $1,583

12 In Stock

1 Yr PDF Supply warranty

What is Refurbished?

Ships .

Repair Service

$664

Save $1,749

5-10 Days

1 Yr PDF Supply warranty

 

Repair Completion:
5-10 Days

Allen-Bradley's 1756-RM is a module for ControlLogix redundancy, that can only be used with the ControlLogix platform to enable redundancy for controllers. It manages the connectivity between two (2) identical controllers deployed in a rack with identical components and configurations. It offers redundancy system monitoring and module health monitoring via an embedded LED display, including PRI, COM, and OK. The current consumption of the 1756-RM redundancy module is 4 mA at 1.2 volts DC, 1.2 mA at 5.1 volts DC, and 120 mA at 24 volts DC. It has a power dissipation of 9 watts. This ControlLogix device has an open enclosure and a T4 temperature code. The unit is chassis-mounted and can be inserted into any available position. The 1756-RM is available in series A and B. It is strongly recommended to install the same series to maximize the redundancy setup's functionality. When paired with the same series of redundancy modules, 100 Mbps (megabits per second) are attainable. This module is compatible with 1756-A4/A7/A10/A13/A17 ControlLogix chassis, 1756-PA72/PA75/PB72/PB75 standard power supplies, as well as other 1756-xx redundant power supplies. It's a single-slot module that can be installed in any available chassis position. The redundant pair's configuration must match that of the companion chassis. The 1756-RM includes one LC fiber optic connector with single-mode operation. It is necessary to use the 1756-RMCx redundancy cable to synchronize the redundant controller pair's operation. This controller can be configured using the redundancy configuration utility for setting up redundancy and the Studio 5000 Logix designer for configuring the module's global parameters. The operating temperature range for the 1756-RM module is 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit); it carries certifications from CE, C-Tick, CSA, and cUL-us standards.

Technical Specifications for 1756-RM

Manufacturer NameAllen Bradley
Product TypeRedundancy module
SeriesControlLogix
Current draws4 milliamps at 1.2 VDC, 1.2 milliamps at 5.1 VDC, and 120 milliamps at 24 VDC
Power dissipation9 watts
Thermal dissipation31 BTU per hour
CertificationCE, CSA, Ex, C-Tick, and cUL-us
IEC temperature codeT4
Storage temperature(-40 to 85) degrees Celsius
Operating temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.