GE / IP FANUC Series 90/30 In Stock
Home » Allen Bradley » ControlLogix » You are here: 1756-PH75
1756-PH75
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the 1756-PH75 1756-PH75//A1756-PH75//B
Common misspellings:
- l756-PH75
- 1756PH75
The 1756-PH75 by Allen Bradley is a power supply module engineered under the ControlLogix device series. The module comes with an input power voltage of 125 Volts DC and falls under the power voltage range of 90 to 143 Volts DC. Located on the left-chassis, the 1756-PH75, the module has an input voltage power of 95 Watts while the output power for the module is rated at 75 Watts at 60 degrees Celsius. The shipping dimension for this module is 5.51 x 4.41 x 5.71 inches. It weighs about 2.5 pounds which is equivalent to 1.1 Kilogram. The 1756-PH75 operating temperature is rated at 0 to 60 degrees Celsius or 32 to 140 Fahrenheit with a capability to withstand -40 to 85 degrees Celsius at storage. The 1756-PH75 also has been tested to withstand 5 to 95% non-condensing humidity. The maximum current capacity for the 1756-PH75 at 1.2 Volts is rated at 1.5 Amps while at 3.3 Volts it is rated at 4 Amps.
The isolation voltage for the 1756-PH75 is rated at 250 Volts power input-to-backplane fitted with reinforced insulation type tested at 3500 Volts DC for 60 seconds. The ControlLogix power supplies are supplied along with 1756 chassis and come in different selection or configurations including standard power supplies, ControlLogix-XT Power Supplies and Redundant power supplies. The 1756-PH75 also comes with conformal coating that helps to protect the assembly offering layer of protection against contaminants and also protecting the module from excessive humidity. The module also features an inrush current at a maximum of 30 Amps and overcurrent protection.
